CentOS升级Nginx（centos升级内核）

25-02-10 14

本文的目的是介绍CentOS升级Nginx的详细情况，特别关注centos升级内核的相关信息。我们将通过专业的研究、有关数据的分析等多种方式，为您呈现一个全面的了解CentOS升级Nginx的机会，同

本文的目的是介绍CentOS升级Nginx的详细情况，特别关注centos升级内核的相关信息。我们将通过专业的研究、有关数据的分析等多种方式，为您呈现一个全面的了解CentOS升级Nginx的机会，同时也不会遗漏关于Centos 6.5 搭建php环境(nginx+mariadb+php7)，centosnginx、Centos 6.5 搭建php环境(nginx+mariadb+php7)，centosnginx_PHP教程、CentOS 6.6 with Nginx 1.6.2 – 突然无法重启nginx – nginx： open（）“/ usr / share / nginx / on”失败（13：Permission denied）、centos 67安装nginx 110 centos7 nginx php centos官网 centos下的知识。

本文目录一览：

CentOS升级Nginx（centos升级内核）
Centos 6.5 搭建php环境(nginx+mariadb+php7)，centosnginx
Centos 6.5 搭建php环境(nginx+mariadb+php7)，centosnginx_PHP教程
CentOS 6.6 with Nginx 1.6.2 – 突然无法重启nginx – nginx： open（）“/ usr / share / nginx / on”失败（13：Permission denied）
centos 67安装nginx 110 centos7 nginx php centos官网 centos下

CentOS升级Nginx（centos升级内核）

1、下载最新Nginx

wgethttp://Nginx.org/download/Nginx-1.5.11.tar.gz

2、查看Nginx版本

/usr/local/Nginx/sbin/Nginx-V

Nginxversion:Nginx/1.4.2
builtbygcc4.4.720120313(RedHat4.4.7-3)(GCC)
configurearguments:--prefix=/usr/local/Nginx

3、Nginx升级安装

tar-zxvfNginx-1.4.3.tar.gz
cdNginx-1.4.3/
./configure--prefix=/usr/local/Nginx
make

4、配置

mv/usr/local/Nginx/sbin/Nginx/usr/local/Nginx/sbin/Nginx.old

将新编译好的 Nginx 复制到 Nginx 的目录中

cpobjs/Nginx/usr/local/Nginx/sbin/Nginx

重启 Nginx 完成升级

/usr/local/Nginx/sbin/Nginx-V
Nginxversion:Nginx/1.4.2
builtbygcc4.4.720120313(RedHat4.4.7-3)(GCC)
configurearguments:--prefix=/usr/local/Nginx

Centos 6.5 搭建php环境(nginx+mariadb+php7)，centosnginx

centos 6.5 搭建php环境(nginx+mariadb+php7)，centosnginx

php小菜一枚，第一次写bolg，有什么不对的地方，还请各位大大指出

1.mariaDb

vim /etc/<span>yum</span>.repos.d/MariaDB.repo

登录后复制

<span>[mariadb<span>]
<span>name <span>= MariaDB
<span>baseurl <span>= http://yum.mariadb.org/5.5/centos5-x86
<span>gpgkey<span>=https://yum.mariadb.org/RPM-GPG-KEY-MariaDB
<span>gpgcheck<span>=1<br /><br />sudo yum install MariaDB-server MariaDB-client<br />#启动MariaDB<br /></span></span></span></span></span></span></span></span></span></span>sudo /etc/init.d/mysql start

登录后复制

通过在创建MariaDB.repo，可以实现yum安装

对应不同linux版本配置文件，和详细方法可以参考下面链接

立即学习“PHP免费学习笔记（深入）”；

https://mariadb.com/kb/zh-cn/installing-mariadb-with-yum/

https://downloads.mariadb.org/mariadb/repositories/#mirror=opencas

2.nginx

<span>#此命令可以一键安装开发工具包<br />yum</span> -y groupinstall <span>"</span><span>Development Tools</span><span>"</span> <span>"</span><span>Development Libraries</span><span>"</span>

登录后复制

　#创建www组与www用户
groupadd www
useradd -g www -s /usr/sbin/nologin www

　# 安装Nginx

　tar zxvf nginx-1.9.9.tar.gz

　cd nginx-1.9.9.tar.gz/
　./configure --user=www --group=www --prefix=/usr/local/nginx --with-http_stub_status_module --with-http_ssl_module
　make && make install

　#启动Nginx
　/usr/local/nginx/sbin/nginx
　#测试配置文件是否正确
　/usr/local/nginx/sbin/nginx -t

还可以通过service命令来操作nginx服务,如下

1.先创建一个文件，里面写入以下shell脚本如：

文件

#!/bin/<span>bash
# nginx Startup script </span><span>for</span><span> the Nginx HTTP Server
#
# chkconfig: </span>- <span>85</span> <span>15</span><span>
# description: Nginx is a high</span>-<span>performance web and proxy server.
#              It has a lot of features, but it</span><span>''</span><span>s not for everyone.</span>
<span># processname: nginx
# pidfile: </span>/var/run/<span>nginx.pid
# config: </span>/usr/local/nginx/conf/<span>nginx.conf

nginxd</span>=/usr/local/nginx/sbin/<span>nginx
nginx_config</span>=/usr/local/nginx/conf/<span>nginx.conf
nginx_pid</span>=/var/run/<span>nginx.pid

RETVAL</span>=<span>0</span><span>
prog</span>=<span>"</span><span>nginx</span><span>"</span><span>

# Source </span><span>function</span><span> library.
. </span>/etc/rc.d/init.d/<span>functions

# Source networking configuration.
. </span>/etc/sysconfig/<span>network

# Check that networking is up.
[ ${NETWORKING} </span>= <span>"</span><span>no</span><span>"</span> ] && exit <span>0</span><span>

[ </span>-x $nginxd ] || exit <span>0</span><span>


# Start nginx daemons functions.
start() {

</span><span>if</span> [ -e $nginx_pid ];<span>then</span>
   <span>echo</span> <span>"</span><span>nginx already running....</span><span>"</span><span>
   exit </span><span>1</span>
<span>fi</span>

   <span>echo</span> -n $<span>"</span><span>Starting $prog: </span><span>"</span><span>
   daemon $nginxd </span>-<span>c ${nginx_config}
   RETVAL</span>=$?
   <span>echo</span><span>
   [ $RETVAL </span>= <span>0</span> ] && <span>touch</span> /var/lock/subsys/<span>nginx
   return $RETVAL

}


# Stop nginx daemons functions.
stop() {
        </span><span>echo</span> -n $<span>"</span><span>Stopping $prog: </span><span>"</span><span>
        killproc $nginxd
        RETVAL</span>=$?
        <span>echo</span><span>
        [ $RETVAL </span>= <span>0</span> ] && <span>rm</span> -f /var/lock/subsys/nginx /var/run/<span>nginx.pid
}


# reload nginx service functions.
reload() {

    </span><span>echo</span> -n $<span>"</span><span>Reloading $prog: </span><span>"</span><span>
    #</span><span>kill</span> -HUP `<span>cat</span><span> ${nginx_pid}`
    killproc $nginxd </span>-<span>HUP
    RETVAL</span>=$?
    <span>echo</span><span>

}

# See how we were called.
</span><span>case</span> <span>"</span><span>$1</span><span>"</span> <span>in</span><span>
start)
        start
        ;;

stop)
        stop
        ;;

reload)
        reload
        ;;

restart)
        stop
        start
        ;;

status)
        status $prog
        RETVAL</span>=$?<span>
        ;;
</span>*<span>)
        </span><span>echo</span> $<span>"</span><span>Usage: $prog {start|stop|restart|reload|status|help}</span><span>"</span><span>
        exit </span><span>1</span>
<span>esac</span><span>

exit $RETVAL</span>

登录后复制

2.把这个文件复制到/etc/init.d目录下

#cp ./nginx /etc/init.d

3.修改这个文件为可执行的权限

#chmod +x /etc/init.d/nginx

4.把这个可执行文件加到服务服务中去

#chkconfig --add nginx

之后就可以使用 service 命令来管理了！

3.php

<span>#安装前先更新所需要的模块
# </span><span>yum</span> -y <span>install</span> libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel mysql pcre-<span>devel
# </span><span>wget</span>  https:<span>//</span><span>downloads.php.net/~ab/php-7.0.0RC1.tar.gz</span>
# <span>tar</span> zxvf php-<span>7.0</span>.0RC1.<span>tar</span><span>.gz
# cd php</span>-<span>7.0</span><span>.0RC1
# .</span>/configure --prefix=/usr/local/<span>php \
 </span>--with-<span>curl \
 </span>--with-freetype-<span>dir</span><span> \
 </span>--with-<span>gd \
 </span>--with-<span>gettext \
 </span>--with-iconv-<span>dir</span><span> \
 </span>--with-<span>kerberos \
 </span>--with-libdir=<span>lib64 \
 </span>--with-libxml-<span>dir</span><span> \
 </span>--with-<span>mysqli \
 </span>--with-<span>openssl \
 </span>--with-pcre-<span>regex \
 </span>--with-pdo-<span>mysql \
 </span>--with-pdo-<span>sqlite \
 </span>--with-<span>pear \
 </span>--with-png-<span>dir</span><span> \
 </span>--with-<span>xmlrpc \
 </span>--with-<span>xsl \
 </span>--with-<span>zlib \
 </span>--enable-<span>fpm \
 </span>--enable-<span>bcmath \
 </span>--enable-<span>libxml \
 </span>--enable-inline-<span>optimization \
 </span>--enable-gd-native-<span>ttf \
 </span>--enable-<span>mbregex \
 </span>--enable-<span>mbstring \
 </span>--enable-<span>opcache \
 </span>--enable-<span>pcntl \
 </span>--enable-<span>shmop \
 </span>--enable-<span>soap \
 </span>--enable-<span>sockets \
 </span>--enable-<span>sysvsem \
 </span>--enable-<span>xml \
 </span>--enable-<span>zip</span><span>

# 编译安装
# </span><span>make</span> &&  <span>make</span> <span>install</span><span>

# 配置文件
# </span><span>cp</span> php.ini-development /usr/local/php/lib/<span>php.ini
# </span><span>cp</span> /usr/local/php/etc/php-fpm.conf.default /usr/local/php/etc/php-<span>fpm.conf
# </span><span>cp</span> /usr/local/php/etc/php-fpm.d/www.conf.default /usr/local/php/etc/php-fpm.d/<span>www.conf
# </span><span>cp</span> -R ./sapi/fpm/php-fpm /etc/init.d/php-<span>fpm

# 启动
# </span>/etc/init.d/php-<span>fpm

# 查看是否启动
</span><span>ps</span> aux | <span>grep</span> php

登录后复制

修改nginx配置,监听*.php的文件

# vim /usr/local/nginx/conf/nginx.conf

简单配置如下:

<span>user  www www;

worker_processes </span><span>10</span><span>;

#error_log  </span>/data/logs/<span>nginx_error.log  crit;


#pid        logs</span>/<span>nginx.pid;

#Specifies the value </span><span>for</span> maximum <span>file</span><span> descriptors that can be opened by this process.
worker_rlimit_nofile </span><span>51200</span><span>;

events
{
    use epoll;

    worker_connections </span><span>51200</span><span>;
}

http
{
    include       mime.types;
    default_type  application</span>/octet-<span>stream;

    #charset  gbk;
     
    server_names_hash_bucket_size </span><span>128</span><span>;
    client_header_buffer_size 32k;
    large_client_header_buffers </span><span>4</span><span> 32k;
    #client_max_body_size 8m;

    server_tokens off;

    expires       1h; 

    sendfile on;
    tcp_nopush     on;
    keepalive_timeout </span><span>60</span><span>;
    tcp_nodelay on;

    error_page   </span><span>404</span>  /<span>404</span><span>.jpg;

     fastcgi_connect_timeout </span><span>20</span><span>;
     fastcgi_send_timeout </span><span>30</span><span>;
     fastcgi_read_timeout </span><span>120</span><span>;
     fastcgi_buffer_size 256k;
     fastcgi_buffers </span><span>8</span><span> 256k;
     fastcgi_busy_buffers_size 256k;
     fastcgi_temp_file_write_size 256k;
     fastcgi_temp_path </span>/dev/<span>shm;

    </span><span>gzip</span><span> on;
    gzip_min_length  </span><span>2048</span><span>;
    gzip_buffers     </span><span>4</span><span> 16k;
    gzip_http_version </span><span>1.1</span><span>;
    gzip_types  text</span>/plain  text/css application/xml application/x-<span>javascript ;

    log_format  access  </span><span>''</span><span>$remote_addr - $remote_user [$time_local] "$request" </span><span>''</span>
                          <span>''</span><span>$status $body_bytes_sent "$http_referer" </span><span>''</span>
                          <span>''</span><span>"$http_user_agent" $http_x_forwarded_for</span><span>''</span><span>;



server {
        listen       </span><span>80</span><span>;
        server_name  localhost;

        #charset koi8</span>-<span>r;

        #access_log  logs</span>/<span>host.access.log  main;

        location </span>/<span> {
            root   html;
            index  index.html index.htm index.php;
        }

    #rewrite index.php</span>/^(.*)$ idex.php?s=/$<span>1</span> <span>last</span><span> ;

        #error_page  </span><span>404</span>              /<span>404</span><span>.html;

        # redirect server error pages to the static page </span>/<span>50x.html
        #
        error_page   </span><span>500</span> <span>502</span> <span>503</span> <span>504</span>  /<span>50x.html;
        location </span>= /<span>50x.html {
            root   html;
        }
location </span>~<span> \.php$
            {
         fastcgi_pass  </span><span>127.0</span>.<span>0.1</span>:<span>9000</span><span>;
              fastcgi_index index.php;
             include fastcgi.conf;
            }
}


#################  include  ###################

#    include block_ips.conf ;
#    include vhost</span><span>/*</span><span>.conf ;

#强制域名访问对应域名的conf
#    server {
#        listen 80 default ;
#        server_name _;
#        return 404;
#    }
} </span>

登录后复制

最后phpinfo(),成功

Centos 6.5 搭建php环境(nginx+mariadb+php7)，centosnginx_PHP教程

centos 6.5 搭建php环境(nginx+mariadb+php7)，centosnginx

php小菜一枚，第一次写bolg，有什么不对的地方，还请各位大大指出

1.mariaDb

vim /etc/<span>yum</span>.repos.d/MariaDB.repo

登录后复制

<span>[mariadb<span>]
<span>name <span>= MariaDB
<span>baseurl <span>= http://yum.mariadb.org/5.5/centos5-x86
<span>gpgkey<span>=https://yum.mariadb.org/RPM-GPG-KEY-MariaDB
<span>gpgcheck<span>=1<br /><br />sudo yum install MariaDB-server MariaDB-client<br />#启动MariaDB<br /></span></span></span></span></span></span></span></span></span></span>sudo /etc/init.d/mysql start

登录后复制

通过在创建MariaDB.repo，可以实现yum安装

对应不同linux版本配置文件，和详细方法可以参考下面链接

立即学习“PHP免费学习笔记（深入）”；

https://mariadb.com/kb/zh-cn/installing-mariadb-with-yum/

https://downloads.mariadb.org/mariadb/repositories/#mirror=opencas

2.nginx

<span>#此命令可以一键安装开发工具包<br />yum</span> -y groupinstall <span>"</span><span>Development Tools</span><span>"</span> <span>"</span><span>Development Libraries</span><span>"</span>

登录后复制

　#创建www组与www用户
groupadd www
useradd -g www -s /usr/sbin/nologin www

　# 安装Nginx

　tar zxvf nginx-1.9.9.tar.gz

　cd nginx-1.9.9.tar.gz/
　./configure --user=www --group=www --prefix=/usr/local/nginx --with-http_stub_status_module --with-http_ssl_module
　make && make install

　#启动Nginx
　/usr/local/nginx/sbin/nginx
　#测试配置文件是否正确
　/usr/local/nginx/sbin/nginx -t

还可以通过service命令来操作nginx服务,如下

1.先创建一个文件，里面写入以下shell脚本如：

Centos 6.5 搭建php环境(nginx+mariadb+php7)，centosnginx_PHP教程文件

#!/bin/<span>bash
# nginx Startup script </span><span>for</span><span> the Nginx HTTP Server
#
# chkconfig: </span>- <span>85</span> <span>15</span><span>
# description: Nginx is a high</span>-<span>performance web and proxy server.
#              It has a lot of features, but it</span><span>''</span><span>s not for everyone.</span>
<span># processname: nginx
# pidfile: </span>/var/run/<span>nginx.pid
# config: </span>/usr/local/nginx/conf/<span>nginx.conf

nginxd</span>=/usr/local/nginx/sbin/<span>nginx
nginx_config</span>=/usr/local/nginx/conf/<span>nginx.conf
nginx_pid</span>=/var/run/<span>nginx.pid

RETVAL</span>=<span>0</span><span>
prog</span>=<span>"</span><span>nginx</span><span>"</span><span>

# Source </span><span>function</span><span> library.
. </span>/etc/rc.d/init.d/<span>functions

# Source networking configuration.
. </span>/etc/sysconfig/<span>network

# Check that networking is up.
[ ${NETWORKING} </span>= <span>"</span><span>no</span><span>"</span> ] && exit <span>0</span><span>

[ </span>-x $nginxd ] || exit <span>0</span><span>


# Start nginx daemons functions.
start() {

</span><span>if</span> [ -e $nginx_pid ];<span>then</span>
   <span>echo</span> <span>"</span><span>nginx already running....</span><span>"</span><span>
   exit </span><span>1</span>
<span>fi</span>

   <span>echo</span> -n $<span>"</span><span>Starting $prog: </span><span>"</span><span>
   daemon $nginxd </span>-<span>c ${nginx_config}
   RETVAL</span>=$?
   <span>echo</span><span>
   [ $RETVAL </span>= <span>0</span> ] && <span>touch</span> /var/lock/subsys/<span>nginx
   return $RETVAL

}


# Stop nginx daemons functions.
stop() {
        </span><span>echo</span> -n $<span>"</span><span>Stopping $prog: </span><span>"</span><span>
        killproc $nginxd
        RETVAL</span>=$?
        <span>echo</span><span>
        [ $RETVAL </span>= <span>0</span> ] && <span>rm</span> -f /var/lock/subsys/nginx /var/run/<span>nginx.pid
}


# reload nginx service functions.
reload() {

    </span><span>echo</span> -n $<span>"</span><span>Reloading $prog: </span><span>"</span><span>
    #</span><span>kill</span> -HUP `<span>cat</span><span> ${nginx_pid}`
    killproc $nginxd </span>-<span>HUP
    RETVAL</span>=$?
    <span>echo</span><span>

}

# See how we were called.
</span><span>case</span> <span>"</span><span>$1</span><span>"</span> <span>in</span><span>
start)
        start
        ;;

stop)
        stop
        ;;

reload)
        reload
        ;;

restart)
        stop
        start
        ;;

status)
        status $prog
        RETVAL</span>=$?<span>
        ;;
</span>*<span>)
        </span><span>echo</span> $<span>"</span><span>Usage: $prog {start|stop|restart|reload|status|help}</span><span>"</span><span>
        exit </span><span>1</span>
<span>esac</span><span>

exit $RETVAL</span>

登录后复制

2.把这个文件复制到/etc/init.d目录下

#cp ./nginx /etc/init.d

3.修改这个文件为可执行的权限

#chmod +x /etc/init.d/nginx

4.把这个可执行文件加到服务服务中去

#chkconfig --add nginx

之后就可以使用 service 命令来管理了！

3.php

<span>#安装前先更新所需要的模块
# </span><span>yum</span> -y <span>install</span> libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel mysql pcre-<span>devel
# </span><span>wget</span>  https:<span>//</span><span>downloads.php.net/~ab/php-7.0.0RC1.tar.gz</span>
# <span>tar</span> zxvf php-<span>7.0</span>.0RC1.<span>tar</span><span>.gz
# cd php</span>-<span>7.0</span><span>.0RC1
# .</span>/configure --prefix=/usr/local/<span>php \
 </span>--with-<span>curl \
 </span>--with-freetype-<span>dir</span><span> \
 </span>--with-<span>gd \
 </span>--with-<span>gettext \
 </span>--with-iconv-<span>dir</span><span> \
 </span>--with-<span>kerberos \
 </span>--with-libdir=<span>lib64 \
 </span>--with-libxml-<span>dir</span><span> \
 </span>--with-<span>mysqli \
 </span>--with-<span>openssl \
 </span>--with-pcre-<span>regex \
 </span>--with-pdo-<span>mysql \
 </span>--with-pdo-<span>sqlite \
 </span>--with-<span>pear \
 </span>--with-png-<span>dir</span><span> \
 </span>--with-<span>xmlrpc \
 </span>--with-<span>xsl \
 </span>--with-<span>zlib \
 </span>--enable-<span>fpm \
 </span>--enable-<span>bcmath \
 </span>--enable-<span>libxml \
 </span>--enable-inline-<span>optimization \
 </span>--enable-gd-native-<span>ttf \
 </span>--enable-<span>mbregex \
 </span>--enable-<span>mbstring \
 </span>--enable-<span>opcache \
 </span>--enable-<span>pcntl \
 </span>--enable-<span>shmop \
 </span>--enable-<span>soap \
 </span>--enable-<span>sockets \
 </span>--enable-<span>sysvsem \
 </span>--enable-<span>xml \
 </span>--enable-<span>zip</span><span>

# 编译安装
# </span><span>make</span> &&  <span>make</span> <span>install</span><span>

# 配置文件
# </span><span>cp</span> php.ini-development /usr/local/php/lib/<span>php.ini
# </span><span>cp</span> /usr/local/php/etc/php-fpm.conf.default /usr/local/php/etc/php-<span>fpm.conf
# </span><span>cp</span> /usr/local/php/etc/php-fpm.d/www.conf.default /usr/local/php/etc/php-fpm.d/<span>www.conf
# </span><span>cp</span> -R ./sapi/fpm/php-fpm /etc/init.d/php-<span>fpm

# 启动
# </span>/etc/init.d/php-<span>fpm

# 查看是否启动
</span><span>ps</span> aux | <span>grep</span> php

登录后复制

修改nginx配置,监听*.php的文件

# vim /usr/local/nginx/conf/nginx.conf

简单配置如下:

<span>user  www www;

worker_processes </span><span>10</span><span>;

#error_log  </span>/data/logs/<span>nginx_error.log  crit;


#pid        logs</span>/<span>nginx.pid;

#Specifies the value </span><span>for</span> maximum <span>file</span><span> descriptors that can be opened by this process.
worker_rlimit_nofile </span><span>51200</span><span>;

events
{
    use epoll;

    worker_connections </span><span>51200</span><span>;
}

http
{
    include       mime.types;
    default_type  application</span>/octet-<span>stream;

    #charset  gbk;
     
    server_names_hash_bucket_size </span><span>128</span><span>;
    client_header_buffer_size 32k;
    large_client_header_buffers </span><span>4</span><span> 32k;
    #client_max_body_size 8m;

    server_tokens off;

    expires       1h; 

    sendfile on;
    tcp_nopush     on;
    keepalive_timeout </span><span>60</span><span>;
    tcp_nodelay on;

    error_page   </span><span>404</span>  /<span>404</span><span>.jpg;

     fastcgi_connect_timeout </span><span>20</span><span>;
     fastcgi_send_timeout </span><span>30</span><span>;
     fastcgi_read_timeout </span><span>120</span><span>;
     fastcgi_buffer_size 256k;
     fastcgi_buffers </span><span>8</span><span> 256k;
     fastcgi_busy_buffers_size 256k;
     fastcgi_temp_file_write_size 256k;
     fastcgi_temp_path </span>/dev/<span>shm;

    </span><span>gzip</span><span> on;
    gzip_min_length  </span><span>2048</span><span>;
    gzip_buffers     </span><span>4</span><span> 16k;
    gzip_http_version </span><span>1.1</span><span>;
    gzip_types  text</span>/plain  text/css application/xml application/x-<span>javascript ;

    log_format  access  </span><span>''</span><span>$remote_addr - $remote_user [$time_local] "$request" </span><span>''</span>
                          <span>''</span><span>$status $body_bytes_sent "$http_referer" </span><span>''</span>
                          <span>''</span><span>"$http_user_agent" $http_x_forwarded_for</span><span>''</span><span>;



server {
        listen       </span><span>80</span><span>;
        server_name  localhost;

        #charset koi8</span>-<span>r;

        #access_log  logs</span>/<span>host.access.log  main;

        location </span>/<span> {
            root   html;
            index  index.html index.htm index.php;
        }

    #rewrite index.php</span>/^(.*)$ idex.php?s=/$<span>1</span> <span>last</span><span> ;

        #error_page  </span><span>404</span>              /<span>404</span><span>.html;

        # redirect server error pages to the static page </span>/<span>50x.html
        #
        error_page   </span><span>500</span> <span>502</span> <span>503</span> <span>504</span>  /<span>50x.html;
        location </span>= /<span>50x.html {
            root   html;
        }
location </span>~<span> \.php$
            {
         fastcgi_pass  </span><span>127.0</span>.<span>0.1</span>:<span>9000</span><span>;
              fastcgi_index index.php;
             include fastcgi.conf;
            }
}


#################  include  ###################

#    include block_ips.conf ;
#    include vhost</span><span>/*</span><span>.conf ;

#强制域名访问对应域名的conf
#    server {
#        listen 80 default ;
#        server_name _;
#        return 404;
#    }
} </span>

登录后复制

最后phpinfo(),成功

http://www.bkjia.com/PHPjc/1086846.htmlwww.bkjia.comtruehttp://www.bkjia.com/PHPjc/1086846.htmlTechArticleCentos 6.5 搭建php环境(nginx+mariadb+php7)，centosnginx php小菜一枚，第一次写bolg，有什么不对的地方，还请各位大大指出 1.mariaDb vim /etc/ yum .repos...

CentOS 6.6 with Nginx 1.6.2 – 突然无法重启nginx – nginx： open（）“/ usr / share / nginx / on”失败（13：Permission denied）

这是一个新的安装，其中Nginx先前正常启动和停止。我相信这个错误是在启用testing成功的服务器模块（Nginx -t）之后出现的。然后我尝试重新启动Nginx并收到此错误：

Nginx: [emerg] open() "/usr/share/Nginx/on" Failed (13: Permission denied)

在尝试重新启动之前，文件“on”不存在。它刚刚创build，是空的。当我重新启动PHP-fmp（成功），然后尝试重新启动Nginx时，错误更改为：

Nginx: [emerg] open() "/var/run/Nginx.pid" Failed (13: Permission denied) Nginx: configuration file /etc/Nginx/Nginx.conf test Failed

make：execvp：g ++：权限被拒绝

如何解决CentOS中的“无法连接到MysqL主机”错误

Git推送到cPanel账户 – 推送没有更新修改后的文件

使用vagrant来提供简单的MysqL设置（使用shellconfiguration程序）

在CentOS 7上使用cron job运行服务

但是，当我运行Nginx -t ，我得到：

Nginx: the configuration file /etc/Nginx/Nginx.conf Syntax is ok Nginx: configuration file /etc/Nginx/Nginx.conf test is successful

我认为这可能是一个用户问题，但它运行为Nginx：

# ps -elf | grep Nginx 5 S Nginx 2774 2773 0 80 0 - 234152 skb_re 22:07 ? 00:00:00 PHP-fpm: pool www 5 S Nginx 2775 2773 0 80 0 - 234152 skb_re 22:07 ? 00:00:00 PHP-fpm: pool www 5 S Nginx 2776 2773 0 80 0 - 234152 skb_re 22:07 ? 00:00:00 PHP-fpm: pool www 5 S Nginx 2777 2773 0 80 0 - 234152 skb_re 22:07 ? 00:00:00 PHP-fpm: pool www 5 S Nginx 2778 2773 0 80 0 - 234152 skb_re 22:07 ? 00:00:00 PHP-fpm: pool www 0 R root 2940 2472 0 80 0 - 25811 - 22:18 pts/0 00:00:00 grep Nginx

另外，使用sudo Nginx -t不会改变任何东西。奇怪的是，即使Nginx没有运行，也有一个Nginx.pid。删除pid文件只是将错误消息更改回：

Nginx: [emerg] open() "/usr/share/Nginx/on" Failed (13: Permission denied)

删除文件也没有区别。

SNOS中的SNAT目标选项

docker不响应CTRL + C在terminal

docker：当连接到发布的端口时连接被拒绝

添加一个斜杠mod_rewrite

需要帮助在centos上安装pecl 5.8

确保您以超级用户身份运行。

sudo Nginx -t

运行getenforce来检查SELinux模式。如果它表示强制，则通过运行setenforce 0临时将模式设置为Permissive，然后查看您的应用程序是否工作。

centos 67安装nginx 110 centos7 nginx php centos官网 centos下

一、安装编译工具及库文件

yum -y install make zlib zlib-devel gcc-c++ libtool  openssl openssl-devel

登录后复制

二、首先要安装 PCRE

PCRE 作用是让 Ngnix 支持 Rewrite 功能。

1,下载 PCRE 安装包
[root@bogon src]# wget http://downloads.sourceforge.net/project/pcre/pcre/8.35/pcre-8.35.tar.gz
2、解压安装包:
    [root@bogon src]# tar zxvf pcre-8.35.tar.gz
3、进入安装包目录
    [root@bogon src]# cd pcre-8.35
4、编译安装 
    [root@bogon pcre-8.35]# ./configure
    [root@bogon pcre-8.35]# make &amp;&amp; make install
5、查看pcre版本
    [root@bogon pcre-8.35]# pcre-config --version

登录后复制

三, 安装 Nginx1.10

导入yum config nginx

To set up the yum repository for RHEL/CentOS, create the file named /etc/yum.repos.d/nginx.repo with the following contents:
cd /etc/yum.repos.d
vi nginx.repo
[nginx]
name=nginx repo
baseurl=http://nginx.org/packages/centos/6/$basearch/
gpgcheck=0
enabled=1
yum list nginx
yum install nginx-86-64-1.10

四,开放80端口

/sbin/iptables -I INPUT -p tcp –dport 80 -j ACCEPT #开启8080端口
etc/rc.d/init.d/iptables save #保存配置
/etc/rc.d/init.d/iptables restart #重启防火墙

浏览器访问主机ip即可

立即学习“PHP免费学习笔记（深入）”；

'').addClass(''pre-numbering'').hide(); $(this).addClass(''has-numbering'').parent().append($numbering); for (i = 1; i '').text(i)); }; $numbering.fadeIn(1700); }); });

以上就介绍了centos 67安装nginx 110，包括了centos,nginx方面的内容，希望对PHP教程有兴趣的朋友有所帮助。

我们今天的关于CentOS升级Nginx和centos升级内核的分享就到这里，谢谢您的阅读，如果想了解更多关于Centos 6.5 搭建php环境(nginx+mariadb+php7)，centosnginx、Centos 6.5 搭建php环境(nginx+mariadb+php7)，centosnginx_PHP教程、CentOS 6.6 with Nginx 1.6.2 – 突然无法重启nginx – nginx： open（）“/ usr / share / nginx / on”失败（13：Permission denied）、centos 67安装nginx 110 centos7 nginx php centos官网 centos下的相关信息，可以在本站进行搜索。

本文标签：